This is a demo store. No orders will be fulfilled. english
Begadi V-Alarm / Lipo Checker / Warner "Compact"
Other interesting articles:
The Begadi LiPo warner monitors the voltage of every single cell in the battery pack and gives an alarm if voltage is below 3.0V/cell. The Warner is simply plugged into the balancer connection of the battery.
Make sure to connect the negative connection on the LiPo Warner (marked with a "" - "" on the circuit board) to the negative connection of the balancer plug on your battery (usually the black cable). Precise ICs and exclusively SMD components are used. Due to its small size and low weight, this LiPo Warner can be used anywhere. It fits all 2S - 3S LiPo or LiIon batteries.
Please note:
- if the voltage rises above 4.3V, the LED flashes red and beeps slowly
- if the voltage is between 3.0V and 4.3V, the LED lights up green and there is no sound
- if the voltage is below 3.0V, the LED flashes red and beeps quickly
Please note the instruction leaflet.
39mm x 20mm x 10mm
Make sure to connect the negative connection on the LiPo Warner (marked with a "" - "" on the circuit board) to the negative connection of the balancer plug on your battery (usually the black cable). Precise ICs and exclusively SMD components are used. Due to its small size and low weight, this LiPo Warner can be used anywhere. It fits all 2S - 3S LiPo or LiIon batteries.
Please note:
- if the voltage rises above 4.3V, the LED flashes red and beeps slowly
- if the voltage is between 3.0V and 4.3V, the LED lights up green and there is no sound
- if the voltage is below 3.0V, the LED flashes red and beeps quickly
Please note the instruction leaflet.
39mm x 20mm x 10mm
Review Partner