This is a demo store. No orders will be fulfilled. english
Maple Leaf 60 ° "MR Hop" GBB / VSR Hop Up Bucking / rubber - yellow
The MR series from Maple Leaf can be compared to an R-Hop, here the patch surface covers the entire barrel window and is therefore suitable for heavier BBs.
Our internal tests have shown that even with a backup (1.0 joule) you should use 0.28g BBs. If the BBs are chosen too lightly, an overhop can quickly occur. The Maple Leaf Omega or longer can still be used as a tensioner, we do not recommend normal rounds with this bucking.
Suitable for VSR-10 Spring Sniper and clones. (VSR-10, Well MB02 & MB03, etc) and many GBB pistols and GBB rifles such as Marui and WE 1911, Hi Capa, SIG, WE Open Bolt long guns and many other models, but only if a barrel with an open HopUp window is installed has been. (e.g. VSR barrels from Orga, Poseidon and Maple Leaf - NOT EdGi).
Due to the size of the patch surface, the recommendations of the muzzle velocity differ from the other Maple Leaf rubbers.
Muzzle velocities - overview:
50° Version: Optimal for muzzle velocities below 80 - 110m/s.
60° Version: Optimal for muzzle velocities between 100 - 130m/s.
70° Version: Optimal for muzzle velocities between 120 - 140m/s.
80° Version: Optimal for muzzle velocities over 140m/s.
For GBBs, we recommend the following runs:
- Maple Leaf Crazy Jet
- RA-Tech 6.02mm
- Lambda 6.03mm
- POSEIDON Air Cushion
- Orga Super 6.00mm
Attention:
These buckings only work for runs with an OPEN Hopup window (like Maple Leaf Autobot + Decepticon for example). Not suitable for WE GBBs with original barrel! A combination of rubber and tuning barrel is required here.
The buckings need about 500 shots to get them properly shot.
Our internal tests have shown that even with a backup (1.0 joule) you should use 0.28g BBs. If the BBs are chosen too lightly, an overhop can quickly occur. The Maple Leaf Omega or longer can still be used as a tensioner, we do not recommend normal rounds with this bucking.
Suitable for VSR-10 Spring Sniper and clones. (VSR-10, Well MB02 & MB03, etc) and many GBB pistols and GBB rifles such as Marui and WE 1911, Hi Capa, SIG, WE Open Bolt long guns and many other models, but only if a barrel with an open HopUp window is installed has been. (e.g. VSR barrels from Orga, Poseidon and Maple Leaf - NOT EdGi).
Due to the size of the patch surface, the recommendations of the muzzle velocity differ from the other Maple Leaf rubbers.
Muzzle velocities - overview:
50° Version: Optimal for muzzle velocities below 80 - 110m/s.
60° Version: Optimal for muzzle velocities between 100 - 130m/s.
70° Version: Optimal for muzzle velocities between 120 - 140m/s.
80° Version: Optimal for muzzle velocities over 140m/s.
For GBBs, we recommend the following runs:
- Maple Leaf Crazy Jet
- RA-Tech 6.02mm
- Lambda 6.03mm
- POSEIDON Air Cushion
- Orga Super 6.00mm
Attention:
These buckings only work for runs with an OPEN Hopup window (like Maple Leaf Autobot + Decepticon for example). Not suitable for WE GBBs with original barrel! A combination of rubber and tuning barrel is required here.
The buckings need about 500 shots to get them properly shot.
Review Partner